Re-surfacing baths

carolyn · Post by **carolyn** » Mon Sep 04, 2006 1:08 pm

We have two bathrooms we intend to refurbish but want to keep the current baths as they are good quality. However they need resurfacing. In the UK this is a service you can find quite easily. Does anyone know a company that does this in the CVO area?

John1 · Post by **John1** » Mon Sep 04, 2006 11:13 pm

Sorry I dont know of anyone but you could try asking at the bathroom showroom near the fatacil in Lagoa.

laserblazer · Post by **laserblazer** » Tue Sep 05, 2006 5:49 pm

This might give you a few clues?

Lesley Jean · Post by **Lesley Jean** » Tue Sep 05, 2006 6:56 pm

laserblazer how do you do that???????

laserblazer · Post by **laserblazer** » Tue Sep 05, 2006 8:02 pm

Lesley Jean wrote: laserblazer how do you do that???????

That's what they all ask

"Do what?" I reply.

Lesley Jean · Post by **Lesley Jean** » Tue Sep 05, 2006 8:38 pm

hehe... I mean how do you put information onto a word, as in your post with the word 'This'

laserblazer · Post by **laserblazer** » Tue Sep 05, 2006 8:58 pm

Copy the address you want to link. Start your post. At the point where you want the link to go click on the URL button. Use the left arrow to take the cursor inside the ]. Enter = then paste in the link address. Use the right arrow to take the cursor out of the ]. Enter your link word followed immediately by altW. Then continue typing normally.

I've found that if you make a mistake and try and correct it, it never works and it is best to start again.

Hope it helps.[/url]

DaGi · Post by **DaGi** » Wed Sep 06, 2006 8:17 am

Do you have any experience with this product, Laserblazer ? It looks most interesting to me because I was planning to renew my bath in CVO.
But after reading the info I think this is much easier - if it works.

laserblazer · Post by **laserblazer** » Wed Sep 06, 2006 9:49 am

Sorry Dagi, I don't have any first hand experience with baths period.

Might be worth doing a google search on the product itself or try one of the DIY forums.

carolyn · Post by **carolyn** » Wed Sep 06, 2006 12:37 pm

Thanks for this Laserblazer - I agree with Dagi - it would be interesting to hear from anyone who has used it. I will try looking on the web to see if there is any mention of it on some of the diy forums.