Set of Four Ford Alloy Wheels & Tyres

[Lulu]

Set of four Ford Alloy wheels with 185/65/14 tyres, which are nearly new. Approximately six plus millimeter tread left, complete with hub covers and wheel nuts, balanced and ready to fit, will fit most Fords. They were removed from a '98 Ford Mondeo and are in very good clean condition. €160 - can deliver locally, Carvoeiro/Lagoa area.

[maccasa]

Can you tell me the PCD and number of the stud holes?

[Lulu]

Hi Maccasa

Sorry, I am not a car dealer or parts specialist - so do not have the PCD - there are 4 stud holes if that is of any use to you .

[maccasa]

Hi lulu - well that's a start - now can you measure the distance between the centre of the stud holes and the one opposite - it will probably be 100mm

[Lulu]

Hi Maccasa

Have tried to take this measurement. I have made two measurements - diagonal opposites across the centre of the wheel are 108mm and from stud to stud is 96.5mm. I hope that makes sense .

[maccasa]

thanks Lulu - that's completely foxed me now - never heard of 108 mm. Standard ford is 100mm - which is what I have on my boat trailer. I shall be out there in 4 weeks time - if I haven't found any others AND you havent sold these I will contact you to take a closer look. Thanks for your efforts

[R.Wethereyet]

This may help.

http://www.carlsalter.com/ford-wheel-fitments.html

You will note that 90% of Ford cars with 4 stud fixing have always been 108mm.

You're correct Lulu

[Lulu]

Hi R.Wethereyet !

Thanks for your comments, thought my old eyes were deceiving me ! or the digital micrometer was playing up !

[maccasa]

Yep you are absolutely correct - 108 it is - I checked at my tyre place yesterday - mine must be from a vauxhall which seem to have 100mm as standard. so they wouldn't fit anyway - thanks for the effort!